One of the most overlooked essentials in every home is right under your feet – the floor. Went with cork flooring? Smart move – it’s natural, warm, and incredibly comfortable. But even the best floors, cork included, need reliable protection. WS EasyFinish Gloss Varnish adds a tough, high-shine shield that guards your floor against everyday wear and tear. The result? A floor that looks fresh, polished, and brand new every day.
Protects Against Surface Damage
Refined Glossy Finish
Quick & Easy Application
Performance-Tested on Cork
Makes Cleaning Simple
Durable, Long-Term Protection
Got questions? We’ve got answers!
WHY SHOULD I SEAL NATURAL CORK FLOORS?
A varnish acts as a strong barrier that protects cork from scratches, dents, and daily wear. WS EasyFinish forms a resilient coat designed to keep your floor looking its best for years.
Beyond protection, it adds a sleek gloss finish that enhances the cork’s natural beauty and texture.
WHERE DOES WS EASYFINISH PERFORM BEST?
It’s specially formulated for cork and hardwood flooring.
Perfect for high-traffic spaces like living rooms, hallways, and kitchens, where durability is key.
WHAT KIND OF LOOK WILL THIS VARNISH CREATE?
Expect a glossy, polished surface. Light reflects beautifully, giving your floors a more upscale and stylish appearance.
CAN I APPLY IT MYSELF?
Definitely. This is a ready-to-use, single-component varnish. No mixing, no extra steps – just open the can and roll it on. DIY made easy.
HOW SHOULD I PREP THE FLOOR?
Make sure the surface is even, dry, and clean. For best results, cork should contain no more than 12% moisture.
Remove old finishes, oils, wax, or dirt. A well-prepped floor ensures stronger adhesion and a longer-lasting finish.
HOW DO I APPLY THE VARNISH PROPERLY?
Shake the container well before use. If cork tiles are glued down, make sure the adhesive has fully dried.
Apply at least two coats using a roller. Allow each coat to dry for a minimum of 4 hours at +68°F (20°C) and 50% humidity. Full durability and load resistance are reached after 5 days.
The ideal conditions: room temperature between +59°F and +77°F, with air humidity between 40–75%. Good ventilation speeds up drying and ensures an even cure.
If more than 24 hours pass between coats, lightly sand before applying the next layer.
HOW MUCH PRODUCT WILL I NEED?
Average coverage is about 80–120 ml per m² (approx. 3–5 fl oz per 10 sq ft), depending on the surface absorption and application method. This measurement applies to a single coat.
WHAT’S THE BEST WAY TO STORE WS EASYFINISH?
Keep it at room temperature or slightly cooler, always above +41°F (+5°C). Protect from freezing or overheating to maintain product quality.
Worried that a protective finish might take away from the natural beauty of your cork flooring? No need – the shine actually highlights the texture of the cork and delivers a sleek, polished look. The result is a floor with a more upscale, stylish appeal that still keeps its authentic character. On top of that, it’s well-protected against the wear and tear of daily life.
#1 THE RIGHT CARE FOR CORK
Cork flooring performs great in everyday living, but like any surface, it needs proper care. Not every finish is a good fit – some dry too rigid and brittle, while others don’t bond well with cork, leaving the floor under-protected.
WS EasyFinish is a low-emission, water-based finish formulated specifically for cork. It’s flexible, resistant to cracking, and built to last. Plus, it brings out a refined sheen that enhances the surface detail and preserves the natural look of the floor.
#2 DESIGN WITHOUT SACRIFICE
Even though WS EasyFinish is a single-component finish that goes on with ease, its quality matches that of many advanced two-part systems. It spreads evenly during application with no streaks or buildup, and once cured, it delivers a smooth, uniform layer.
That glossy coat gives cork floors a sophisticated, modern look – the texture pops, and the space feels more dynamic and eye-catching. It’s the perfect blend of durability and style that adds lasting value to your home.
#3 EVERYDAY COMFORT MADE EASY
A cork floor that’s well-sealed guarantees everyday comfort and peace of mind. The finish acts as a protective shield, blocking dirt from sinking into the surface. WS EasyFinish creates a durable coat that stands up to scuffs, spills, and chemicals, keeping messes on the surface where they can be wiped away in seconds. It’s the smart solution for high-traffic areas of the home.
This also makes day-to-day cleaning effortless – a quick pass with a soft cloth is usually all it takes, with no harsh cleaners or scrubbing required. The payoff? Less cleaning, less hassle – and a floor that looks polished and fresh, even in busy spaces.
| Volume | 5 liters |
| Type | Gloss |
| Efficiency | 100 ml/m² (recommended to apply two coats) |
Customers who bought this product also bought
