The cork model roadbed ballast for the H0 railway modellers scale makes it possible to build a realistic railway quickly and easily. Owing to the use of a special flat, the modelling stopper is very light, flexible and perfectly reduces the sounds and absorbs vibrations. Cork may be used for gravel imitation and as a base element for display windows and showcases.
Why are cork model roadbed stripes so special?
The cork model profile is 5mm thick and 48mm wide. The edges of the ground are precisely profiled on both sides at a 45-degree angle which allows for faithful reproduction or real railways. To make it more convenient for you, we offer a cork in the form of a single undercoat. You can used the profile to construct straight sections of tracks. Cutting the natural cork with a knife for wallpapers along the axis of the track you will create two flexible halves, which can be modelled on all types of arches and turnouts. Cork ballast is 45 cm long.
What will be the best for assembly?
A cork adhesive Wakol D3540 from our offer will be the best for gluing a cork model roadbed for mock-ups or dioramas. as it is an excellent contact glue and leaves a soft and flexible joint after drying. The quality of vibration damping by the cork model roadbed ballast. The quality of vibration damping by the cork model roadbed ballast will not be affected by installation of the plug. The installation will be simple and efficient. The assembly will also be simple as the cork is easily cut with just with a modelling scalpel or a sharp modelling knife. Therefore, you will be able to make platforms, pads for turnouts or railway crossing yourself.
Can I buy a roadbed form cork in the form of cork squares?
We have supplemented our offer with analogous material in the form of universal cork sheets for the convenience of all our customers interested in the cork ballast. Due to the size of the board it is possible to cut larger cork formats, e.g. as a base for a greater number of parallel tracks, stations or locomotives. The cork model roadbed ballast is dedicated primarily to the H0 scale, nevertheless it can also be used for the TT, N or Z scale, selecting the thickness of the plug and cutting it on the desired width.